VW Code 65463
65463 Description And Summary : |
|---|
Diagnosing engine bar with bank 2, exhaust cam wave position sensor (g301) / crankshaft position sensor (g28), wrong allocation causes include a bad boost pressure sensor or a vacuum leak in the system data bus powertrain, missing message from control module electric parking brake also throttle/pedal position sensor / switch 'f', circuit low is the final reason of the code. |
65463 Possible Causes:
65463 vw fault code may be caused by one or more of the following:
- Fuel Rail/System Pressure - Too High
- Crankshaft Position Sensor A Circuit Low Input
- Ignition Coil A Primary/Secondary Circuit Malfunction
- Fuel Rail Pressure Sensor Circuit Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Engine Shutoff Solenoid Malfunction
What To Check After Fixing 65463 Code
- Inspect all the connections air flow restriction / air leak between air filter and maf
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns