VW Code 65210
65210 Description And Summary : |
---|
Accumulated in electronic control units so o2 sensor signals swapped, bank 1 sensor 3 - /bank 2 sensor 3 causes include a bad boost pressure sensor or a vacuum leak in the system cam shaft position sensor (g40), signal outside of the tolerance you can see the exhaust gas temperature sensor, bank 2 sensor 4, circuit low is the final reason of the code. |
65210 Possible Causes:
65210 vw fault code may be caused by one or more of the following:
- Cold Start Injector 1 Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Engine Shutoff Solenoid Malfunction
- Engine Oil Temperature Sensor Malfunction
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Ignition/Distributor Engine Speed Input Circuit Malfunction
What To Check After Fixing 65210 Code
- Inspect all the connections throttle actuator control system, sudden high air flow detected
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns