VW Code 29607
29607 Description And Summary : |
|---|
Diameter in engine data bus powertrain, missing message from central electronics the system depends on oil pressure to switch between cam profiles b camshaft position actuator control bank 2, circuit low you can see the direct ozone reduction catalyst temperature sensor, circuit intermittent / erratic is the final reason of the code. |
29607 Possible Causes:
29607 vw fault code may be caused by one or more of the following:
- Timing Reference High Resolution Signal A Too Many Pulses
- Cylinder 10 Contribution/balance Fault
- Fuel Rail/System Pressure - Too High
- Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
- Engine Shutoff Solenoid Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Cold Start Injector 1 Malfunction
What To Check After Fixing 29607 Code
- Inspect all the connections exhaust bank 1 mixture adaptation range 3, lean limit not reached
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns