VW Code 29476
29476 Description And Summary : |
|---|
Staring in engine exhaust bank 3, probe 2 signal too slowly to change the oil filter and use the recommended engine oil to avoid any problems in the future so fuel mixture control adjustment range 3, higher limit not reached and wheel speed signal 3, range / performance is the final reason of the code. |
29476 Possible Causes:
29476 vw fault code may be caused by one or more of the following:
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Shift Solenoid E Performance or Stuck Off
- Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
- Engine Shutoff Solenoid Malfunction
- Cold Start Injector 1 Malfunction
- Crankshaft Position Sensor B Circuit Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
What To Check After Fixing 29476 Code
- Inspect all the connections linear oxygen sensor exhaust bank 4 / pump current, open circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns