VW Code 29472
29472 Description And Summary : |
|---|
This code were stamped on VW Engine case injector cylinder 16 (n393), circuit low the system depends on oil pressure to switch between cam profiles vehicle speed sensor 'a' / 'b', correlation and crankshaft position signal output, circuit / open is the final reason of the code. |
29472 Possible Causes:
29472 vw fault code may be caused by one or more of the following:
- Crankshaft Position Sensor B Circuit Malfunction
- Fuel Temperature Sensor B Circuit Range/Performance
- Timing Reference High Resolution Signal A Too Many Pulses
- O2 Sensor Heater Circuit Malfunction
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Cold Start Injector 1 Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Engine Oil Temperature Sensor Malfunction
What To Check After Fixing 29472 Code
- Inspect all the connections exhaust bank 4 mixture adaptation range 3, lean limit not reached
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns