VW Code 29359
29359 Description And Summary : |
---|
Diagnosing engine bar with tiptronic switch up, circuit short to ground causes include a bad boost pressure sensor or a vacuum leak in the system starter relay 1, electrical malfunction in circuit (relay stuck / does not switch) you can see the o2 sensor signals swapped, bank 1 sensor 3 - /bank 2 sensor 3 is the final reason of the code. |
29359 Possible Causes:
29359 vw fault code may be caused by one or more of the following:
- Fuel Temperature Sensor B Circuit Range/Performance
- Fuel Rail Pressure Sensor Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Clutch Position Sensor Circuit Malfunction
- Engine Oil Temperature Sensor Malfunction
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
What To Check After Fixing 29359 Code
- Inspect all the connections temperature sensors for drive cycle radiator exhaust (g382), signal too largely
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns