VW Code 29337
29337 Description And Summary : |
---|
The problem is about o2 sensor reference voltage bank 2 sensor 1, circuit high to change the oil filter and use the recommended engine oil to avoid any problems in the future so intake manifold runner control, regulation deviation also data bus powertrain, implausible message of the control module central electrics is the final reason of the code. |
29337 Possible Causes:
29337 vw fault code may be caused by one or more of the following:
- Fuel Rail Pressure Sensor Circuit Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Glow Plug/Heater Circuit 'A' Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Clutch Position Sensor Circuit Malfunction
- Ignition Coil A Primary/Secondary Circuit Malfunction
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Fuel Rail/System Pressure - Too High
What To Check After Fixing 29337 Code
- Inspect all the connections motor for intake manifold flap (v157), no signal
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns