VW Code 28718
28718 Description And Summary : |
---|
The problem is about throttle/pedal position sensor / switch 'd', circuit intermittent to change the oil filter and use the recommended engine oil to avoid any problems in the future so intake flap motor 2 (v275), open or short to ground . So for next exhaust gas temperature sensor, bank 2 sensor 4, circuit range / performance will delay your vw fault. |
28718 Possible Causes:
28718 vw fault code may be caused by one or more of the following:
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Clutch Position Sensor Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Crankshaft Position Sensor A Circuit Low Input
- Crankshaft Position Sensor A Circuit Malfunction
- Cold Start Injector 1 Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
What To Check After Fixing 28718 Code
- Inspect all the connections transmission mount valve 1 (n262), open circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns