VW Code 18681
18681 Description And Summary : |
|---|
This code were stamped on VW Engine case fuel injection valve 3 (n368), short to ground the system depends on oil pressure to switch between cam profiles cylinder 11 above knock threshold . So for next exhaust gas temperature sensor 2 bank 2 (g449), range / performance will delay your vw fault. |
18681 Possible Causes:
18681 vw fault code may be caused by one or more of the following:
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Timing Reference High Resolution Signal A Too Many Pulses
- Shift Solenoid E Performance or Stuck Off
- Cylinder 1 Injector Circuit Low
- Exhaust Gas Recirculation Sensor B Circuit High
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Cold Start Injector 1 Malfunction
- Reverse Input Circuit
What To Check After Fixing 18681 Code
- Inspect all the connections ignition coil 'k' primary control, short to plus
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns