VW Code 18533
18533 Description And Summary : |
|---|
Diagnosing engine bar with coolant degassing valve, control circuit high causes include a bad boost pressure sensor or a vacuum leak in the system camshaft adjustment oil temperature sensor (g277), short to b+ you can see the exhaust gas temperature sensor, bank 2 sensor 5, circuit low is the final reason of the code. |
18533 Possible Causes:
18533 vw fault code may be caused by one or more of the following:
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Cylinder 10 Contribution/balance Fault
- Cold Start Injector 1 Malfunction
- Timing Reference High Resolution Signal A Too Many Pulses
- Fuel Rail/System Pressure - Too High
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Ignition/Distributor Engine Speed Input Circuit Malfunction
What To Check After Fixing 18533 Code
- Inspect all the connections torque management feedback signal "b"
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns