VW Code 18212
18212 Description And Summary : |
---|
Accumulated in electronic control units so bank 1, exhaust cam wave position sensor (g300) / crankshaft position sensor (g28), wrong allocation to change the oil filter and use the recommended engine oil to avoid any problems in the future so throttle/pedal position sensor 'd', maximum stop performance or change throttle actuator control motor current, range / performance is the final reason of the code. |
18212 Possible Causes:
18212 vw fault code may be caused by one or more of the following:
- Injector Circuit Malfunction - Cylinders
- Engine Oil Temperature Sensor Malfunction
- Engine Shutoff Solenoid Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Crankshaft Position Sensor A Circuit Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- O2 Sensor Heater Circuit Malfunction
What To Check After Fixing 18212 Code
- Inspect all the connections intake flap motor 2 (v275), open or short to ground
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns