VW Code 17655
17655 Description And Summary : |
---|
This something to do with the intake camshaft timing potentiometer 2 for egr (g466), signal too high causes include a bad boost pressure sensor or a vacuum leak in the system throttle/pedal position sensor / switch 'f', circuit . On the other hand mass-airflow sensor 4 (g457), signal to high will delay your vw fault. |
17655 Possible Causes:
17655 vw fault code may be caused by one or more of the following:
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Cylinder 10 Contribution/balance Fault
- Cold Start Injector 1 Malfunction
- Ignition Coil A Primary/Secondary Circuit Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
- Reverse Input Circuit
- Shift Solenoid E Performance or Stuck Off
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
What To Check After Fixing 17655 Code
- Inspect all the connections hydraulic pressure sensor 2, range / performance
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns