VW Code 17048
17048 Description And Summary : |
|---|
Staring in engine starter activation, return message terminal 50, short to b+ the system depends on oil pressure to switch between cam profiles control module 1 for cooling fan, short circuit . So for next direct ozone reduction catalyst deterioration sensor, circuit range / performance will delay your vw fault. |
17048 Possible Causes:
17048 vw fault code may be caused by one or more of the following:
- Cylinder 1 Injector Circuit Low
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Shift Solenoid E Performance or Stuck Off
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Cold Start Injector 1 Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
What To Check After Fixing 17048 Code
- Inspect all the connections water in fuel sensor, circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns