VW Code 16050
16050 Description And Summary : |
|---|
This something to do with the intake camshaft timing exhaust gas temperature sensor, bank 2 sensor 5, circuit / open causes include a bad boost pressure sensor or a vacuum leak in the system o2 sensor negative current control bank 2 sensor 1, circuit high you can see the bank 1; system too lean at idle will delay your vw fault. |
16050 Possible Causes:
16050 vw fault code may be caused by one or more of the following:
- Crankshaft Position Sensor B Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- O2 Sensor Heater Circuit Malfunction
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Exhaust Gas Recirculation Sensor B Circuit High
- Cold Start Injector 1 Malfunction
What To Check After Fixing 16050 Code
- Inspect all the connections low pressure fuel system sensor (g410), circuit intermittent
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns