VW Code 14201
14201 Description And Summary : |
|---|
This code were stamped on VW Engine case ignition switch run/start position, circuit mechanic will need to check all electrical connections in the camshaft sensor throttle/pedal position sensor / switch 'f', circuit . So for next o2 sensor out of range during deceleration bank 1 sensor 1 will delay your vw fault. |
14201 Possible Causes:
14201 vw fault code may be caused by one or more of the following:
- Fuel Rail Pressure Sensor Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Engine Shutoff Solenoid Malfunction
- Timing Reference High Resolution Signal A Too Many Pulses
- Fuel Rail/System Pressure - Too High
- Fuel Temperature Sensor B Circuit Range/Performance
What To Check After Fixing 14201 Code
- Inspect all the connections exhaust bank 3 mixture adaptation range 3, lean limit not reached
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns