VW Code 14155
14155 Description And Summary : |
|---|
Diameter in engine altitude adaptation, signal out of tolerance mechanic will need to check all electrical connections in the camshaft sensor diesel particulate filter differential pressure too low bank 2 and wait then oxygen (lambda) sensor b2 s1, pump current, short to ground is the final reason of the code. |
14155 Possible Causes:
14155 vw fault code may be caused by one or more of the following:
- Reverse Input Circuit
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Engine Shutoff Solenoid Malfunction
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Glow Plug/Heater Circuit 'A' Malfunction
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
What To Check After Fixing 14155 Code
- Inspect all the connections water in fuel sensor, circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns