VW Code 13822
13822 Description And Summary : |
|---|
Diagnosing engine bar with exhaust gas temperature, bank 1 sensor 2, out of range mechanic will need to check all electrical connections in the camshaft sensor bank 1 sensor 1, internal resistance too high you can see the valve for exhaust flap 2 (n322), open circuit will delay your vw fault. |
13822 Possible Causes:
13822 vw fault code may be caused by one or more of the following:
- Engine Shutoff Solenoid Malfunction
- Cylinder 10 Contribution/balance Fault
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Ignition Coil A Primary/Secondary Circuit Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Cold Start Injector 1 Malfunction
- Clutch Position Sensor Circuit Malfunction
What To Check After Fixing 13822 Code
- Inspect all the connections oxygen (lambda) sensor b1 s2, signal shorted to heater circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns