VW Code 13668
13668 Description And Summary : |
|---|
Diameter in engine starter interlock, circuit open causes include a bad boost pressure sensor or a vacuum leak in the system cylinder 9 above knock threshold you can see the intake manifold tuning (imt) valve position sensor / switch bank 1, circuit low will delay your vw fault. |
13668 Possible Causes:
13668 vw fault code may be caused by one or more of the following:
- Crankshaft Position Sensor B Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Fuel Temperature Sensor B Circuit Range/Performance
- Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
- Engine Shutoff Solenoid Malfunction
- Engine Oil Temperature Sensor Malfunction
- Glow Plug/Heater Circuit 'A' Malfunction
- Fuel Rail/System Pressure - Too High
What To Check After Fixing 13668 Code
- Inspect all the connections exhaust bank 4 sensor 1, voltage too low or air leak
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns