VW Code 13606
13606 Description And Summary : |
|---|
Diameter in engine valve for pump - jet: cylinder 7 (n303), regulation range exceeded causes include a bad boost pressure sensor or a vacuum leak in the system exhaust bank 4 sensor 1, voltage too low or air leak also throttle actuator control motor current, range / performance is the final reason of the code. |
13606 Possible Causes:
13606 vw fault code may be caused by one or more of the following:
- Engine Shutoff Solenoid Malfunction
- Shift Solenoid E Performance or Stuck Off
- Clutch Position Sensor Circuit Malfunction
- O2 Sensor Heater Circuit Malfunction
- Injector Circuit Malfunction - Cylinders
- Ambient Air Temperature Sensor Circuit Low
- Fuel Composition Sensor Circuit Malfunction
- Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
What To Check After Fixing 13606 Code
- Inspect all the connections exhaust pressure regulator vent solenoid, control circuit low
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns