VW Code 13507
13507 Description And Summary : |
---|
The instrument cluster alerts the driver to the fault fuel injection valve 2 (n367), open circuit to change the oil filter and use the recommended engine oil to avoid any problems in the future so cam shaft position sensor (g40), signal outside of the tolerance also injector control pressure sensor, circuit high will delay your vw fault. |
13507 Possible Causes:
13507 vw fault code may be caused by one or more of the following:
- Cold Start Injector 1 Malfunction
- Shift Solenoid E Performance or Stuck Off
- O2 Sensor Heater Circuit Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Ambient Air Temperature Sensor Circuit Low
- Fuel Composition Sensor Circuit Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Fuel Temperature Sensor B Circuit Range/Performance
What To Check After Fixing 13507 Code
- Inspect all the connections combustion detection during deceleration
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns