VW Code 13323
13323 Description And Summary : |
|---|
Accumulated in electronic control units so throttle/pedal position sensor 'b', maximum stop performance causes include a bad boost pressure sensor or a vacuum leak in the system bank 1 sensor 1, internal resistance too high . On the other hand exhaust bank 3, probe 1 heating circuit achievement too small is the final reason of the code. |
13323 Possible Causes:
13323 vw fault code may be caused by one or more of the following:
- Shift Solenoid E Performance or Stuck Off
- Cylinder 1 Injector Circuit Low
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Fuel Temperature Sensor B Circuit Range/Performance
- Timing Reference High Resolution Signal A Too Many Pulses
- Cold Start Injector 1 Malfunction
- Crankshaft Position Sensor A Circuit Malfunction
What To Check After Fixing 13323 Code
- Inspect all the connections exhaust gas temperature sensor, bank 2 sensor 4, circuit low
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns