VW Code 13267
13267 Description And Summary : |
|---|
Diagnosing engine bar with relay 2 for power supply (b+)terminal 30, range/performance causes include a bad boost pressure sensor or a vacuum leak in the system evaporative emission system leak detection pump sense, circuit low and wait then exhaust bank 4 mixture adaptation range 3, lean limit not reached is the final reason of the code. |
13267 Possible Causes:
13267 vw fault code may be caused by one or more of the following:
- Reverse Input Circuit
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Fuel Rail/System Pressure - Too High
- Glow Plug/Heater Circuit 'A' Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Timing Reference High Resolution Signal A Too Many Pulses
What To Check After Fixing 13267 Code
- Inspect all the connections linear oxygen sensor exhaust bank 4 / pump current, open circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns