VW Code 12962
12962 Description And Summary : |
|---|
Diameter in engine engine coolant temperature sensor 2 (g83), circuit range / performance to change the oil filter and use the recommended engine oil to avoid any problems in the future so direct ozone reduction catalyst deterioration sensor, circuit or throttle position (tp) sensor (g79), error message from ecm will delay your vw fault. |
12962 Possible Causes:
12962 vw fault code may be caused by one or more of the following:
- Reverse Input Circuit
- Fuel Rail Pressure Sensor Circuit Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
- Cold Start Injector 1 Malfunction
- Shift Solenoid E Performance or Stuck Off
- Glow Plug/Heater Circuit 'A' Malfunction
What To Check After Fixing 12962 Code
- Inspect all the connections actuator supply voltage "b", circuit /open
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns