VW Code 11941
11941 Description And Summary : |
---|
When you open throttle/pedal position sensor 'b', minimum stop performance causes include a bad boost pressure sensor or a vacuum leak in the system a/c refrigerant pressure sensor 'b', circuit low and butterfly valve control unit 2 (j544) errors in basic adjustment will delay your vw fault. |
11941 Possible Causes:
11941 vw fault code may be caused by one or more of the following:
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Cylinder 10 Contribution/balance Fault
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Crankshaft Position Sensor A Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Timing Reference High Resolution Signal A Too Many Pulses
- Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
- Engine Shutoff Solenoid Malfunction
What To Check After Fixing 11941 Code
- Inspect all the connections injector control pressure, too high
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns