VW Code 11390
11390 Description And Summary : |
|---|
The instrument cluster alerts the driver to the fault system too rich at higher load, bank 1 to change the oil filter and use the recommended engine oil to avoid any problems in the future so ng high pressure valve (n372), open circuit or manifold absolute pressure / mass air flow - throttle position correlation at higher load will delay your vw fault. |
11390 Possible Causes:
11390 vw fault code may be caused by one or more of the following:
- Exhaust Gas Recirculation Sensor B Circuit High
- Crankshaft Position Sensor B Circuit Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Fuel Rail Pressure Sensor Circuit Malfunction
- Shift Solenoid E Performance or Stuck Off
- Cold Start Injector 1 Malfunction
What To Check After Fixing 11390 Code
- Inspect all the connections exhaust gas temperature sensor bank 2 sensor 1, circuit range / performance
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns