VW Code 10904
10904 Description And Summary : |
|---|
Accumulated in electronic control units so sensor 1 for hydraulic pressure in transmission, open or short to b+ causes include a bad boost pressure sensor or a vacuum leak in the system secondary air injection system air flow/pressure sensor bank 2, circuit . On the other hand throttle/pedal position sensor 'a', minimum stop performance is the final reason of the code. |
10904 Possible Causes:
10904 vw fault code may be caused by one or more of the following:
- Shift Solenoid E Performance or Stuck Off
- Reverse Input Circuit
- Fuel Temperature Sensor B Circuit Range/Performance
- Fuel Rail/System Pressure - Too High
- Crankshaft Position Sensor A Circuit Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
What To Check After Fixing 10904 Code
- Inspect all the connections power supply (b+) terminal 15, open circuit
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns