VW Code 10733
10733 Description And Summary : |
|---|
This code were stamped on VW Engine case valve for coolant system circuit, high to change the oil filter and use the recommended engine oil to avoid any problems in the future so exhaust gas temperature bank 1, too high and wait then 'b' rocker arm actuator system, stuck on will delay your vw fault. |
10733 Possible Causes:
10733 vw fault code may be caused by one or more of the following:
- Glow Plug/Heater Circuit 'A' Malfunction
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Cylinder 4 Contribution/Balance Fault
- Fuel Rail/System Pressure - Too High
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
What To Check After Fixing 10733 Code
- Inspect all the connections exhaust bank 3, probe 1 heating circuit short-circuit after pluses
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns