VW Code 10393
10393 Description And Summary : |
---|
Accumulated in electronic control units so reversing light, circuit short to ground causes include a bad boost pressure sensor or a vacuum leak in the system torque management feedback signal "a" . On the other hand radiator fan (v7), difficulty of movement / blocked will delay your vw fault. |
10393 Possible Causes:
10393 vw fault code may be caused by one or more of the following:
- Clutch Position Sensor Circuit Malfunction
- Ignition Coil A Primary/Secondary Circuit Malfunction
- Engine Oil Temperature Sensor Malfunction
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Fuel Rail Pressure Sensor Circuit Malfunction
- Engine Shutoff Solenoid Malfunction
- Cold Start Injector 1 Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
What To Check After Fixing 10393 Code
- Inspect all the connections exhaust gas temperature sensor 2 bank 2 (g449), electrical malfunction
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns