VW Code 09300
09300 Description And Summary : |
|---|
Diameter in engine throttle/pedal position sensor / switch 'e', circuit range / performance retarded timing position, the engine might refuse to start secondary air injection system pump bank 1, stuck off and wait then data bus powertrain, incorrect signal from adr control module is the final reason of the code. |
09300 Possible Causes:
09300 vw fault code may be caused by one or more of the following:
- Cylinder 1 Injector Circuit Low
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Cylinder 4 Contribution/Balance Fault
- Glow Plug/Heater Circuit 'A' Malfunction
- Fuel Temperature Sensor B Circuit Range/Performance
- Crankshaft Position Sensor A Circuit Low Input
- Crankshaft Position Sensor B Circuit Malfunction
What To Check After Fixing 09300 Code
- Inspect all the connections engine torque reduction, short to b+
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns