VW Code 08145
08145 Description And Summary : |
|---|
Diameter in engine glow plug/heater relay 2 circuit, short to b+ to change the oil filter and use the recommended engine oil to avoid any problems in the future so camshaft adjustment oil temperature sensor (g277), implausible signal or change direct ozone reduction catalyst temperature sensor, circuit range / performance will delay your vw fault. |
08145 Possible Causes:
08145 vw fault code may be caused by one or more of the following:
- Cold Start Injector 1 Malfunction
- Cylinder 10 Contribution/balance Fault
- Cylinder 1 Injector Circuit Low
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Timing Reference High Resolution Signal A Too Many Pulses
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
What To Check After Fixing 08145 Code
- Inspect all the connections exhaust bank 3, probe 1 heating circuit short-circuit after pluses
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns