VW Code 07300
07300 Description And Summary : |
|---|
Diagnosing engine bar with change-over valve for intake manifold flap 2, performance or stuck off causes include a bad boost pressure sensor or a vacuum leak in the system vacuum reservoir pressure sensor, circuit . On the other hand exhaust bank 3 sensor 1 oxygen sensor signal, voltage too low during deceleration is the final reason of the code. |
07300 Possible Causes:
07300 vw fault code may be caused by one or more of the following:
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Injection Pump Fuel Metering Control 'A' High (Cam/Rotor/Injector)
- Fuel Rail/System Pressure - Too High
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Exhaust Gas Recirculation Sensor B Circuit High
- Fuel Rail Pressure Sensor Circuit Malfunction
What To Check After Fixing 07300 Code
- Inspect all the connections valve for pump - jet: cylinder 11 (n307), range / performance
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns