VW Code 07050
07050 Description And Summary : |
|---|
Diameter in engine ignition switch accessory position, circuit low to change the oil filter and use the recommended engine oil to avoid any problems in the future so secondary air injection system pump bank 1, stuck on . On the other hand camshaft position signal output, circuit low is the final reason of the code. |
07050 Possible Causes:
07050 vw fault code may be caused by one or more of the following:
- Glow Plug/Heater Circuit 'A' Malfunction
- Exhaust Gas Recirculation Sensor B Circuit High
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Injector Circuit Malfunction - Cylinders
- Engine Oil Temperature Sensor Malfunction
- Timing Reference High Resolution Signal A Too Many Pulses
- Shift Solenoid E Performance or Stuck Off
What To Check After Fixing 07050 Code
- Inspect all the connections supply voltage for fuel injector group a, short to ground
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns