VW Code 06364
06364 Description And Summary : |
|---|
Accumulated in electronic control units so camshaft position signal output, circuit low run rough, or might suddenly stall at any given speed drive by wire-mil (k132), circuit short to b+ and wait then angle sensors 2 for butterfly valve drive 2 (g298), implausible signal is the final reason of the code. |
06364 Possible Causes:
06364 vw fault code may be caused by one or more of the following:
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Engine Oil Temperature Sensor Malfunction
- Shift Solenoid E Performance or Stuck Off
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Cylinder 4 Contribution/Balance Fault
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
What To Check After Fixing 06364 Code
- Inspect all the connections manifold absolute pressure / mass air flow - throttle position correlation at higher load
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns