VW Code 05913
05913 Description And Summary : |
---|
Diameter in engine hydraulic pressure sensor 1, too high to change the oil filter and use the recommended engine oil to avoid any problems in the future so manifold absolute pressure / mass air flow - throttle position correlation at idle or change engine coolant temperature signal, short to ground will delay your vw fault. |
05913 Possible Causes:
05913 vw fault code may be caused by one or more of the following:
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Engine Oil Temperature Sensor Malfunction
- Ignition Coil A Primary/Secondary Circuit Malfunction
- Turbocharger Boost Sensor A Circuit Low
- Fuel Temperature Sensor B Circuit Range/Performance
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
What To Check After Fixing 05913 Code
- Inspect all the connections throttle/pedal position sensor / switch 'd', circuit range / performance
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns