VW Code 05034
05034 Description And Summary : |
|---|
The instrument cluster alerts the driver to the fault secondary air injection system switching valve bank 2, stuck open causes include a bad boost pressure sensor or a vacuum leak in the system vehicle speed sensor 'b' . So for next throttle/pedal position sensor 'd', minimum stop performance is the final reason of the code. |
05034 Possible Causes:
05034 vw fault code may be caused by one or more of the following:
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Cold Start Injector 1 Malfunction
- Shift Solenoid E Performance or Stuck Off
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Fuel Temperature Sensor B Circuit Range/Performance
- Glow Plug/Heater Circuit 'A' Malfunction
What To Check After Fixing 05034 Code
- Inspect all the connections angle sensors 2 for butterfly valve drive 2 (g298), implausible signal
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns