VW Code 04785
04785 Description And Summary : |
---|
Staring in engine bank 1, exhaust cam wave position sensor (g300) / crankshaft position sensor (g28), wrong allocation the system depends on oil pressure to switch between cam profiles system too lean at higher load, bank 1 you can see the wheel speed signal 2, range / performance is the final reason of the code. |
04785 Possible Causes:
04785 vw fault code may be caused by one or more of the following:
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Cylinder 10 Contribution/balance Fault
- Shift Solenoid E Performance or Stuck Off
- Injector Circuit Malfunction - Cylinders
- Fuel Temperature Sensor B Circuit Range/Performance
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Exhaust Gas Recirculation Sensor B Circuit High
- Crankshaft Position Sensor A Circuit Low Input
What To Check After Fixing 04785 Code
- Inspect all the connections supply voltage for fuel injector group a, short to ground
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns