VW Code 02541
02541 Description And Summary : |
|---|
The problem is about o2 sensor reference voltage bank 1 sensor 1, circuit high causes include a bad boost pressure sensor or a vacuum leak in the system power supply (b+) terminal 15, implausible . So for next mil request signal active (check for tcm errors too!) will delay your vw fault. |
02541 Possible Causes:
02541 vw fault code may be caused by one or more of the following:
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Ignition/Distributor Engine Speed Input Circuit Malfunction
- Clutch Position Sensor Circuit Malfunction
- Timing Reference High Resolution Signal A Too Many Pulses
- Shift Solenoid E Performance or Stuck Off
- Engine Oil Temperature Sensor Malfunction
- Fuel Composition Sensor Circuit Malfunction
What To Check After Fixing 02541 Code
- Inspect all the connections o2 sensor out of range during deceleration bank 2 sensor 1
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns