VW Code 00565
00565 Description And Summary : |
|---|
This code were stamped on VW Engine case load signal from alternator terminal df, open or short to b+ the system depends on oil pressure to switch between cam profiles pressure control solenoid 2 (n216), open / short to ground and wait then control module defective will delay your vw fault. |
00565 Possible Causes:
00565 vw fault code may be caused by one or more of the following:
- Shift Solenoid E Performance or Stuck Off
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Fuel Rail Pressure Sensor Circuit Malfunction
- Fuel Rail/System Pressure - Too High
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
- Cold Start Injector 1 Malfunction
- Fuel Temperature Sensor B Circuit Range/Performance
- Timing Reference High Resolution Signal A Too Many Pulses
What To Check After Fixing 00565 Code
- Inspect all the connections powertrain data bus, missing message from steering wheel electronics
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns