VW Code 00233
00233 Description And Summary : |
|---|
The problem is about transmission output speed sensor 2 (g196), circuit rpm too high It could be due to limited air getting through your air intake injector cylinder 15 (n392), circuit high . So for next secondary air injection pump-d-relay (j705), circuit short to ground will delay your vw fault. |
00233 Possible Causes:
00233 vw fault code may be caused by one or more of the following:
- Timing Reference High Resolution Signal A Too Many Pulses
- Cold Start Injector 1 Malfunction
- Engine Shutoff Solenoid Malfunction
- Cylinder 10 Contribution/balance Fault
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
What To Check After Fixing 00233 Code
- Inspect all the connections control module 1 for cooling fan, excess temperature
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns