VW Code 00147
00147 Description And Summary : |
---|
Diagnosing engine bar with gear/ratio monitoring adaptation, limit reached the system depends on oil pressure to switch between cam profiles accelerator position sensor 1/2 (g79) + (g185), implausible signal also change-over valve for intake manifold flap 2, performance or stuck off is the final reason of the code. |
00147 Possible Causes:
00147 vw fault code may be caused by one or more of the following:
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- O2 Sensor Heater Circuit Malfunction
- Throttle/Pedal Position Sensor/Switch A Circuit Intermittent
- Fuel Temperature Sensor B Circuit Range/Performance
- Cold Start Injector 1 Malfunction
- Engine Oil Temperature Sensor Malfunction
- Fuel Rail/System Pressure - Too High
What To Check After Fixing 00147 Code
- Inspect all the connections accelerator pedal position sensor 1 (g79), signal too high
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns