VW Code 00073
00073 Description And Summary : |
|---|
Diameter in engine data bus powertrain, implausible message of the airbag control module to change the oil filter and use the recommended engine oil to avoid any problems in the future so throttle/pedal position sensor / switch 'b' / 'c', voltage correlation you can see the cam shaft position sensor (g40), no signal is the final reason of the code. |
00073 Possible Causes:
00073 vw fault code may be caused by one or more of the following:
- Manifold Absolute Pressure/Barometric Pressure Circuit High Input
- Injector Circuit Malfunction - Cylinders
- Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
- Fuel Temperature Sensor B Circuit Range/Performance
- Glow Plug/Heater Circuit 'A' Malfunction
- Injection lump Fuel Metering Control 'B' High (Cam/Rotor/Injector)
What To Check After Fixing 00073 Code
- Inspect all the connections hydraulic actuator valve (n331), electrical malfunction
- Check the engine oil to ensure it's clean and the viscosity
- Restart the vehicle and retest to see if the error returns